Happy Thanksgiving

I was in a food coma today.

It was awesome.

=D

(Photos are from my "Pre-Thanksgiving Thanksgiving.)

What I am thankful for this year:

*My family's health. It's been a rough year for many members of our families, but everyone is still here with us today, and for that I am truly thankful.

*The opportunity for my husband and me to continue our education. It's been a tough road, but I know it will be worth it in the end!

*My kids. My kids are great. My 5 year old is one of the top students in his class. My daughter knows the entire alphabet at 2 1/2 years old. My 10 year old shows more morals and appreciation than many of his peers. We are great parents, even though we were young when we had them.  ;)

*My forever-friends. This year has brought a lot of harsh realities to me. I have almost successfully weeded out the toxic friendships in my life. My supportive friendships mean so much to me. I never wanted to have sisters, but I'd imagine that some of my friendships are just as strong, if not more.

*My marriage. I know that he will be making me laugh every single day until the day I die (whether it be with him or at him). He grounds me. Sometimes I can be too serious, and he reminds me to just laugh.

*My Followers. I can't even begin to describe how important you all are to me. You make me feel important. You encourage me to better my home, my cooking....well...my life in general. Without you, I doubt I would have the motivation to accomplish as much as I have. You give me advice. You pick me up when others have beaten me down. Thank you SO much for everything!

Tell me what you are most thankful for. I'd love to hear it!

2-Minute Bathroom Organization

I try to keep all my organization not only functional, but attractive as well.

But you know what? If people aren't going to see it, who cares if it's not attractive!?

Haha!

I (heart) bobby pins. I use them all. the. time.

Now my daughter uses them all. the. time.

However, it seems like I have to buy a new package every other week.

I lose them like crazy!

I knew that I needed some better organization to keep them in place.

A jar?

No. I would have to dig in the bathroom closet for that. And let's face it...I'm lazy.

;)

The medicine cabinet?

It would make sense, since I do my hair in front of it every morning.

No. It's already pretty full.

Then I had one of those lightbulb moments.

Magnetic strips.

I went to Walmart and bought one of those magnetic strip rolls. The ones with a magnet on one side and sticky tape on the other.

I took everything out of my medicine cabinet and noticed that the mirror was much larger than the opening for the medicine cabinet.

I decided to put magnetic strips on the very top, the bottom, and in the middle where there were no shelves.

Cut the strips to size and press them on firmly.

Then add your bobby pins!

Then I thought, "Hmmm...you know...we can never find tweezers or clippers in this house. I wonder if it'll hold that, too?"

Yep!

Is it pretty?

No.

Is it highly functional?

Heck yes.

And I haven't lost a bobby pin yet.

;)

Featured: Someday Crafts

Click here if you want to check out the post on Someday Crafts that featured my kitchen island!

Thank you, Michelle, for the feature!

If you want to get great tips on crafting up anything (decor, clothes, accessories, etc.) check out Michelle's blog Someday Crafts.

P.S. I do have some new material for you. I have two presentations and a final paper to write for school, so that's consuming a bit of my time. I'll be showing you a quick organizational tip within the next few days, and also a few pictures from this year's "Pre-Thanksgiving Thanksgiving."

Kitchen Island Revamp

My kitchen island was one of the first new things brought into our home.

It was a house-warming gift from my Ma. 

Shortly after this picture was taken, a friend leaned on the pull-out leaf, and it nearly tipped over on him. I really didn't want that happening to one of my children.

I realized that I had to do something to make it safer.

It needed legs.

I browsed the Internet for some inspiration.

It was going to look something like this in the end:

I even have the saddle stools ;)

I realized that I loved the wooden top.

More inspiration:

Love that dark wood top contrasting with the white bottom!

The corbels are pretty sweet, too, but that wouldn't solve my tipping problem.

This makes me almost want an all-white kitchen:

Still loving the dark top and white bottom!

So I pulled off the knife block (that I never used)...

...and the towel bar...

...and wood-puttied the holes.

Then I skirted the bottom with some tall baseboard.

Hailey was helping me take off doors.

What a nice helper.

<3

Then I cut the top from a 3/4" sheet of birch plywood.

(I'll show you how to cut large stock in a separate post!)

I added decorative trim to the outside and secured it with just wood glue and tape.

I didn't want finishing nails ruining the trim, and since the trim is merely decorative (meaning that it won't need to withstand any weight) it doesn't need nails.

After a bit of wood putty and a lot of sanding, I had my top.

I love the grain on birch.

To make sure that I brought out the beautiful wood grain in the best way, I made some sample boards to stain.

I liked the one on the right, but I knew I would have to put a few coats on it to darken it.

It's Red Mahogony from Miniwax.

I put the trim on the sample boards to make sure that it took the color the same as the plywood.

The plywood is birch and the trim is pine.

I also applied a wood conditioner to the wood before staining.

Both birch and pine are soft woods, and they usually take stain very blotchy. A wood conditioner evens out the stain.

I added 3 coats of clear high gloss polyurethane.

 

Next, I had to attach the legs.

I checked online for island legs.

$50+

So I went to Menards. I looked at stairs posts. The cheapest ones that were big enough for my project were $50 each.

50x4=200

$200?!

Heck, I should just buy a whole new island then!

Feeling dejected, I moped to the check-out line with just my painter's tape.

I looked up and I saw the decking department.

"Heck, I bet decking posts are cheaper than indoor posts!"

Sure are!

$12 a piece.

Much better.

;)

So I chopped them to size and added pocket holes with my Kregg jig so that I could attach them to the plywood without drilling through my perfect top.

I didn't stain all of the bottom because it was going to be covered anyways.

Then I placed it on top of the old island and screwed it in place.

I countersunk all of the screws and wood-puttied over them.

After a few days of painting, it was time for new hardware. My current hardware on the rest of my cabinets are aged bronze.

The old silver hardware had to go!

The cheapest ones in the size I needed were $7 a piece.

7x6=42

$42 for hardware?!

Heck no!

So I went home with a $4 can of spray primer instead.

I spray-primed and spray-painted a faux aged bronze finish.

Luckily, I had the spray paint already in my garage.

I used a dark "oil rubbed bronze" finish first (it just looks like a dark grey/brown).

Then a lined up all the hardware on end and gave a quick spray of bronze over the top.

You can't see it in the picture. Sorry.

=(

Anyways, after re-attaching all the doors, attaching the "new" hardware, and adding my centerpiece (of course), I was all done!

Want to see how it turned out?

My mom was extremely surprised that this was the very same island she had bought for me years ago.

I'm thinking that some year I will tear off the two middle doors and make a wine rack similar to this island:

Much prettier, much safer.

I love it!

Coming up:
A quick bathroom organizational idea.
How to cut large stock.

A-Frame Wood Guitar Stand

I was making my husband something awesome for Christmas.

My luck...he found it midway being done.

So I'm going to share it with you (and then figure out something else to make my husband for Christmas).

My husband breathes music.

He's actually a very talented drummer.

His love, though, is playing the guitar.

I let him keep his acoustic in the living room, because I think it looks classy.

For some reason, every time I see an electric guitar, my first thought is Gene Simmons.

Odd?

Anyways, I know he's been wanting a guitar stand.

I don't like the plastic ones. Sure, they are cheap, but I also think they belong in a college dorm, not my house.

The nice wood ones average $200-$300.

Ouch.

Betcha I can make one!



I found this template online.

If you would like this template, the website is listed by the picture.

So I printed it off in 8x10 sheets, then taped them all together.

The guy that originally made this used two pieces of scrap wood, hence that line in the middle.

I wanted this to be decent quality, so I bought a full 3/4 sheet of plywood.

I cut out the template and traced around it on my plywood.

Once I cut it out, I used that piece as my second template. I stayed outside my line so that I could sand the edges.

Then I had two identical sides.

Then I needed to sand the edges.

I learned a really cool trick (in a magazine maybe?) for sanding. Instead of trying to hold your work and maneuver a sander around it, you clasp the handle of the sander in a vice grip and that leaves you with two hands to rotate your material.

This is much easier! I love this trick!

To make sure that the sides remain exactly uniform, I clamped them together before sanding.

After the usual sanding, staining (True Walnut by Miniwax) and polyurethaning, I attached the two sides together at the top with a decorative hinge.

You need to make sure the stand doesn't completely spread while a guitar is on it.

The template calls for two slits to be made so that a ribbon could pass through.

I thought that it would look sloppy.

I thought a chain would look much better, plus I wouldnt' have to try making slits.

To give myself leverage to twist the eye hooks into the wood, I like to use a C-clamp.

Once I got one eye hook in, I carefully closed the stand and pushed down, causing an indent on the other side. The ensures that the eye hooks are in the exact same spot on each side with no measuring!

You also should add padding on the stand so that putting the guitar down doesn't cause any chips.

On the website, he used felt and glue.

Why don't we skip that step and use 3/4" Velcro?? Only the soft side, of course.

;)

I cut off a small piece and stuck it on the front like this:

Then a bottom piece:

And the rest on the back. Repeat on the other side.

I used a hanging basket chain to connect the eye hooks.

I'm not happy that it's green, but since it was just sitting in my garage (FREE!) and it wouldn't be seen when the guitar sits on the stand, I wasn't too worried about it.

It will be replaced some day, I'm sure.

Ready to see how it turned out?

You like??

Coming Up:

Two huge kitchen projects. One is going to knock your socks off!

A quick bathroom organizing idea.

How to make an important woodworking tool.